Dottie has seen almost as many changes as Kaylee.
![]()
Dottie is a "franken AR", her parts are from everywhere. The lower is Spike's Tactical, the lower parts kit is CMMG. The upper is from, the now defunct, Cardinal Armory. The barrel is from the still viable Bison Armory.
I'm using a Magpul MS3 Single QD sling and Surefire X300 that I share among the go-to home defense guns. BUIS is a Knights Armament Corporation 600m Micro Flip-Up. The bipod is a Harris 1A2 Ultralight.
18MAR08
As she was first assembled: Anvil lower, Cardinal upper and 16" mid-length barrel, YHM Phantom 5C2 flash-suppressor, YHM folding front sight, YHM lightweight 4-rail, Knight's Armament Corporation 600m folding BUIS, UTG rail covers, commercial Gen 1 M4 stock, Magpul MIAD pistol grip and L3 EOTech 552.A65/1 optic.
![]()
29MAR08
To get a better picture at longer ranges I added a LaRue PoBoy 2.5x optic.
![]()
04JUN08
The commercial stock was both too long and was contributing to the gun being nose heavy. I changed over to an A2 fixed stock.
![]()
28JUN08
Based on The Lovely Harvey's choice of a Troy Medieval flash-hider for her Cheyenne, I selected their Medieval Muzzle Brake for 6.8 for Dottie. This change also allows me to mount a standard bayonet, in this case an M9.
![]()
![]()
25OCT08
The A2 stock just didn't fit the character of the 16" middy upper, so I replaced it with a Mil-Spec Magpul CTR stock. I also added a GG&G "Sling Thing" to the left side rail.
![]()
29OCT08
The YHM-9634 lightweight 4-rail with the UTG rail covers was like gripping a coffee can. Marv ordered a YHM smoothie free-float tube for his 6.8 build and I followed suit.
![]()
08JAN09
While the smaller diameter was nice, the smoothie tube got HOT when firing. Based on an article I read on Arfcom, I wrapped it with 550 Para-Cord.
![]()
Because of Geff's desire to have a fully noncompliant AR in black and because we couldn't order any color but OD green due to the post-election panic buying, I swapped him my black Magpul stuff for the OD green he ordered.
![]()
11JAN09
Because I had the lightweight 4-rail laying around and hundreds of feet of para-cord left over, I started playing around with alternative wraps.
![]()
25JAN09
And then mounted them on the gun... The smoothie didn't allow the wrap to go far enough to the rear of the gun and I was still burning myself.
![]()
![]()
01FEB09
The para-cord was better, but still not what I wanted. Here is an attempt to be happy with Magpul's ladder style rail protectors.
![]()
01APR09
The Lovely Harvey needed an optic for her Kevina, she preferred the EOTech and I wanted an Aimpoint Comp M4s so it worked out well.
![]()
03APR09
Because this is a SHTF grab gun, it needed a light. This is a Surefire X300.
![]()
![]()
21APR09
The ladder covers were still not what I wanted, so I tried the Magpul XTM modular rail covers. I also moved the light to be easier to activate.
![]()
15MAY09
I really like the XTMs, but I was back to the "gripping a coffee can" problem I had back with the UTG covers. Finally figuring out it's the rails and not what I am covering them with I replace the YHM with a LaRue LT15-9 4-rail.
![]()
One drawback is the Aimpoint is now too far to rear for the PoBoy, but that hasn't affected my shooting at 100 yards.
![]()
![]()
08APR10
I added a Magpul AFG angled fore grip. It's inexpensive so I thought I'd check it out. I rather like it. It does allow your supporting wrist to be at a more natural angle than a conventional handguard and is less obtrusive than a vertical grip.
Right side:
![]()
Left side:
![]()
Wrist angle:
![]()
On the LaRue 4-rail the AFG interferes with the Magpul XTM rail panels. To put the AFG where I was comfortable, I had to remove one section of XTM. In fact, there's no way for the front part of the AFG to put anything on the side rails. The LaRue's bottom rail is closer to the barrel than the top, so there's less room here.
![]()
![]()
The loss of the third XTM panel bothered me because fingers were hitting rail. It's unpleasant. So I took a teeny lip off the underside of the XTM panel with the Dremel and that leaves enough clearance to get the AFG under it.
![]()
![]()
![]()
I had to move my light from the bottom rail to one of the sides, because of the change in grip angle, this is actually easier than the bottom was.
![]()
I took the 'A2' finger stop out of the grip area since, like usual, it was where I wanted a finger instead of between. Even with it reversed.
It doesn't feel at all like I expected it to, but it is more comfortable with Dottie's nose heaviness.
02MAY10
Way back when I had pressure signs from the SSA tactical loads with the Cardinal Armory barrel. I had read that there were things I could do to fix the issue, but just in case those failed, I ordered a new barrel from Bison Armory in June of 2009. It finally arrived last week. Since I am not the sort of person who can leave well enough alone, I swapped the barrels. I like the looks of the heavier contour better.
![]()
Contour before:
![]()
Contour after:
![]()
Plus the new barrel is just slightly longer, letting the bayonet sit on the flash-hider properly!
![]()
24-25MAR11
Removed the MagPul AFG, MIAD and CTR. The AFG was replaced with the XTM panels it originally supplanted. Standard A2 pistol grip returned to replace the MIAD. Genuine Colt M4 stock replaces the CTR. Move the Aimpoint M4s slightly further to the rear to slightly improve balance. The M4 stuff didn't last long and I reverted to my Magpul parts within a couple of days.
![]()
03AUG12
Ditched the Troy Medieval muzzle brake for a Wilson Combat Accu-Tac flash-hider. Dottie is now FULLY non-compliant with the Clinton Assault Weapon ban! The Accu-Tac also has the cannelures for rifle grenades that the Medieval was lacking.![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
24FEB13
The Magpul Illumination Kit came with a short 3-slot section of rail.
I got curious about what use I could put it to and decided to see if mounting a GG&G Sling Thing there would be comfortable.
It is!
![]()
The sling location is similar to where I had a QD socket on the LaRue 4-rail.
Links to Midway USA because they're in the NYFS boycott.
Dottie's name derives from a line in the movie, "Armageddon". The amateur astronomer who discovers the planet killing asteroid wants to be able to name it after his wife, Dottie, because she's a life sucking bitch from which there is no escape.
Dottie is a "franken AR", her parts are from everywhere. The lower is Spike's Tactical, the lower parts kit is CMMG. The upper is from, the now defunct, Cardinal Armory. The barrel is from the still viable Bison Armory.
I'm using a Magpul MS3 Single QD sling and Surefire X300 that I share among the go-to home defense guns. BUIS is a Knights Armament Corporation 600m Micro Flip-Up. The bipod is a Harris 1A2 Ultralight.
18MAR08
As she was first assembled: Anvil lower, Cardinal upper and 16" mid-length barrel, YHM Phantom 5C2 flash-suppressor, YHM folding front sight, YHM lightweight 4-rail, Knight's Armament Corporation 600m folding BUIS, UTG rail covers, commercial Gen 1 M4 stock, Magpul MIAD pistol grip and L3 EOTech 552.A65/1 optic.
29MAR08
To get a better picture at longer ranges I added a LaRue PoBoy 2.5x optic.
04JUN08
The commercial stock was both too long and was contributing to the gun being nose heavy. I changed over to an A2 fixed stock.
28JUN08
Based on The Lovely Harvey's choice of a Troy Medieval flash-hider for her Cheyenne, I selected their Medieval Muzzle Brake for 6.8 for Dottie. This change also allows me to mount a standard bayonet, in this case an M9.
25OCT08
The A2 stock just didn't fit the character of the 16" middy upper, so I replaced it with a Mil-Spec Magpul CTR stock. I also added a GG&G "Sling Thing" to the left side rail.
29OCT08
The YHM-9634 lightweight 4-rail with the UTG rail covers was like gripping a coffee can. Marv ordered a YHM smoothie free-float tube for his 6.8 build and I followed suit.
08JAN09
While the smaller diameter was nice, the smoothie tube got HOT when firing. Based on an article I read on Arfcom, I wrapped it with 550 Para-Cord.
Because of Geff's desire to have a fully noncompliant AR in black and because we couldn't order any color but OD green due to the post-election panic buying, I swapped him my black Magpul stuff for the OD green he ordered.
11JAN09
Because I had the lightweight 4-rail laying around and hundreds of feet of para-cord left over, I started playing around with alternative wraps.
25JAN09
And then mounted them on the gun... The smoothie didn't allow the wrap to go far enough to the rear of the gun and I was still burning myself.
01FEB09
The para-cord was better, but still not what I wanted. Here is an attempt to be happy with Magpul's ladder style rail protectors.
01APR09
The Lovely Harvey needed an optic for her Kevina, she preferred the EOTech and I wanted an Aimpoint Comp M4s so it worked out well.
03APR09
Because this is a SHTF grab gun, it needed a light. This is a Surefire X300.
21APR09
The ladder covers were still not what I wanted, so I tried the Magpul XTM modular rail covers. I also moved the light to be easier to activate.
15MAY09
I really like the XTMs, but I was back to the "gripping a coffee can" problem I had back with the UTG covers. Finally figuring out it's the rails and not what I am covering them with I replace the YHM with a LaRue LT15-9 4-rail.
One drawback is the Aimpoint is now too far to rear for the PoBoy, but that hasn't affected my shooting at 100 yards.
08APR10
I added a Magpul AFG angled fore grip. It's inexpensive so I thought I'd check it out. I rather like it. It does allow your supporting wrist to be at a more natural angle than a conventional handguard and is less obtrusive than a vertical grip.
Right side:
On the LaRue 4-rail the AFG interferes with the Magpul XTM rail panels. To put the AFG where I was comfortable, I had to remove one section of XTM. In fact, there's no way for the front part of the AFG to put anything on the side rails. The LaRue's bottom rail is closer to the barrel than the top, so there's less room here.
The loss of the third XTM panel bothered me because fingers were hitting rail. It's unpleasant. So I took a teeny lip off the underside of the XTM panel with the Dremel and that leaves enough clearance to get the AFG under it.
I took the 'A2' finger stop out of the grip area since, like usual, it was where I wanted a finger instead of between. Even with it reversed.
It doesn't feel at all like I expected it to, but it is more comfortable with Dottie's nose heaviness.
02MAY10
Way back when I had pressure signs from the SSA tactical loads with the Cardinal Armory barrel. I had read that there were things I could do to fix the issue, but just in case those failed, I ordered a new barrel from Bison Armory in June of 2009. It finally arrived last week. Since I am not the sort of person who can leave well enough alone, I swapped the barrels. I like the looks of the heavier contour better.
Contour before:
Contour after:
Plus the new barrel is just slightly longer, letting the bayonet sit on the flash-hider properly!
24-25MAR11
Removed the MagPul AFG, MIAD and CTR. The AFG was replaced with the XTM panels it originally supplanted. Standard A2 pistol grip returned to replace the MIAD. Genuine Colt M4 stock replaces the CTR. Move the Aimpoint M4s slightly further to the rear to slightly improve balance. The M4 stuff didn't last long and I reverted to my Magpul parts within a couple of days.
03AUG12
Ditched the Troy Medieval muzzle brake for a Wilson Combat Accu-Tac flash-hider. Dottie is now FULLY non-compliant with the Clinton Assault Weapon ban! The Accu-Tac also has the cannelures for rifle grenades that the Medieval was lacking.
24SEP12
AFG reinstalled, finger swell front strap returned to service on the MIAD and bipod adaptor mounted with bipod. Full story here.
23DEC12
Displaced is the Anvil Arms lower and the Spike's Tactical Florida Home Town Forum lower in its place.
19FEB13
Replaced the LaRue LT15-9 with a Magpul MOE handguard.
Before:
After:
It's astonishing how taking those 6 ounces off the front make it feel like it weighs nothing up front.
Nekkid:
With bayonet:
20FEB13
This little piece of P-Rail replaces covers one of the slots in the handguard.
The back-side:
![]()
The back-side:
Zero loss of functionality over the 4-rail, still six ounces lighter. Actually the light is slightly better placed now than before.
28NOV13
Deleted the AimPoint M4s and replaced it with my hoary old Sight Unit Infantry Trilux L2A2 on a hard to find Tapco mount. A short rail section allows the use of a Harris 1A2 Ultralight bipod.
![]()
With the Magpul MS3 Single QD sling and Surefire X300 that's shared among the go-to home defense guns. I moved the original KAC 600m sight to Kaylee and replaced it with the compact version of the same. The bipod is actually FuzzyGeff's, and normally resides on his target AR, Olga. I'm borrowing it to get the SUIT zeroed.
![]()
Deleted the AimPoint M4s and replaced it with my hoary old Sight Unit Infantry Trilux L2A2 on a hard to find Tapco mount. A short rail section allows the use of a Harris 1A2 Ultralight bipod.
With the Magpul MS3 Single QD sling and Surefire X300 that's shared among the go-to home defense guns. I moved the original KAC 600m sight to Kaylee and replaced it with the compact version of the same. The bipod is actually FuzzyGeff's, and normally resides on his target AR, Olga. I'm borrowing it to get the SUIT zeroed.